Boxed Hub Kit, GVH34822545 L44649 Bearings, Seal, Cap, Nuts, 5 1/2" Diameter Hub Flange, Painted, BT8 1" Spindle, 1000lb Capacity, Fits Dexter 2200lb Axles (106217) from Redneck Trailer include some of the essential components, such as the inner and outer bearings, as well as the grease seal, grease cap, and wheel nuts. Each hub has a 1,250-pound capacity. The spindle nut and washer are offered separately. This product is designed for use with a 1 1/16" diameter spindle.
Key Features:
- Constructed with care and precision from high-quality materials
- Designed to fulfill the most exacting quality requirements
- High-quality at a reasonable cost
- It is ideal for maintenance and replacement.
- The setup is basic and straightforward.
Product Specifications:
- SKU: 4-106217
- Weight: 7.00 LBS
- Manufacturer Part Number (MPN): 106217
- 2 L44649 Inner and Outer Bearings (1.063" ID)
- 2 L44610 Inner and Outer Races(Already Pressed In) 1.98" OD
- 1 10-60 Grease Seal (1.5" x 1.987")
- 1 46749 Grease Cap (1.986" OD)
- 1 21-41-1 Grease Cap (1.986" OD)
- 1 85-1 Grease Cap Plug
- 5 X1023R Coned Wheel Nuts
- 1 5 on 4.5" Pregreased Hub For Convenience
- 1,250lb Capacity Per Hub
- 4" Overall height
Redline Hub with 5 on 4.5" Bolt Pattern- 1 1/16"" Spindle For 2,000lb Axles Redline hub kits come with some of your main components like the inner and outer bearings. With Redline kits there is no need to worry about the races as they are already pressed into the hub for you. You will also get the grease seal, grease cap, and wheel nuts for the hub. This hub is designed for use with a 1 1/16" diameter spindle. Each hub has a capacity of 1,250lb. Spindle nut and spindle washer sold separately. Items in Kit: • 2 L44649 Inner and Outer Bearings (1.063" ID) • 2 L44610 Inner and Outer Races(Already Pressed In) 1.98" OD • 1 10-60 Grease Seal (1.5" x 1.987") • 1 46749 Grease Cap (1.986" OD) • 1 21-41-1 Grease Cap (1.986" OD) • 1 85-1 Grease Cap Plug • 5 X1023R Coned Wheel Nuts • 1 5 on 4.5" Pregreased Hub For Convenience • 1,250lb Capacity Per Hub • 4" Overall height To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.
