Turning Point Hustler® - Right Hand - Aluminum Propeller - LE1/LE2-1319-4 - 4-Blade - 13" x 19 Pitch - P/N 21431930

Description

Aluminum propellers from Turning Point Hustler give stainless steel performance at aluminum rates.

Turning Point Hustler aluminum propellers resist blade flex and give enhanced fuel economy and performance, thanks to the same race-proven geometry as Turning Point's stainless steel propellers. Tuned exhaust valves in the propeller barrel decrease water density around the blades during acceleration, resulting in faster hole shots and more horsepower. A five-step powder-coated finish protects Hustler aluminum propellers. Propellers and hubs are offered separately.

Squeeze casting provides better strength and resistance to power-robbing flex in all Turning Point aluminum propellers. This unique manufacturing process practically eliminates gaps, pockets, and air bubbles in the propeller material, resulting in a grain structure that is much tighter than that of a traditional die-cast procedure.

Key Features:

Performance of stainless steel at aluminum pricing
Propeller blades resist flexing, resulting in better fuel economy and performance.
Fine-tuned exhaust vents improve hole shot.

Specifications:

SKU: 21431930
UPC: 652480102523
Weight: 6.50 LBS
MATERIAL: Aluminum
PITCH: 19
Hub Kit: Not Included
Brand: Turning Point Propeller

Engine Application

Evinrude/Johnson® 40-140 Horsepower 4.25” Gearcase

2 cyl: 50hp ('71-'74) / 45 to 55hp commercial;

3 cyl: 55, 60, 65, 70hp, 75hp with large gearcase, 65hp commercial;

4 cyl: 75, 85, 88, 90, 100, 110, 115, 120 ('86-'94), 125, 135 ('73-'76), 140 ('77-'84, '86-'94) / H.O. (includes E-TEC H.O.): 60, 90, 115hp;

E-TEC: 40, 50, 60, 65, 75hp / 20" shaft: 90, 115hp (not pontoon series), 130hp ('09-'10)4 stroke: 8hp ('96+), 9.9hp ('95-'01), 15hp ('95+)

Evinrude/Johnson® 60-70 Horsepower (4-Stroke) 4.25” Gearcase

4 stroke (Johnson): 60hp, 70hp

Force® 75-150 Horsepower (2-Stroke) 4.25” Gearcase

75hp ('99) / 90hp to 150hp ('95+)

Honda® 60-130 Horsepower (4-Stroke) 4.25" Gearcase

BF 4 Stroke: P60 / 75, 90 (‘99+) / 100, 115, 130hp. (not 115D)

Honda® 75-90 Horsepower (4-Stroke) 4.25" Gearcase

('95-'98): 75hp, 90hp

Johnson® 50-140 Horsepower 4.25” Gearcase

DF 4 stroke (Johnson): 50AV, 60AV, 115A, 140, 140A4 stroke: 8hp ('96+), 9.9hp ('95-'01), 15hp ('95+)

Johnson® 70-115 Horsepower (4-Stroke) 4.25” Gearcase

4 stroke (Johnson): ('09+): 70A, 80A, 90A, 70, 80 / ('01+): 90, 100, 115 (Not 115A)

Mercury®, Mariner® 40-150 Horsepower 4.25" Gearcase

Note: Props Not Available for '77 & Older models.

(2 & 4 stroke) 40 to 60 Bigfoot / 70 ('87-'89) / 75, 80 ('78-'89), 90, 100, 115, 125, 140hp / 150 XR4/6 (thru 1993, includes equivalent Mariner Magnum I, II, III.)

FourStroke™ & SeaPro™ 4cyl: 40 to 75hp / OptiMax: 75, 90, 115, 125hp

Omc 1.6-3.Ol+ Horsepower 4.25" Gearcase

Cobra 400: 2.3 to 3.0L (‘78-’89) / Sea Drive: 1.6 to 1.8L

Parsun® 60-90 Horsepower 4.25” Gearcase

T60, T75, T85, T90

Suzuki® 50-140 Horsepower 4.25” Gearcase

DF 4 stroke: 50AV, 60AV, 115A, 140, 140A

Suzuki® 60-140 Horsepower 4.25” Gearcase

DT 2 Stroke (‘89+): 75 to 140hp / DF 4 Stroke (‘98-’09): 60hp, 70hp

Suzuki® 70-115 Horsepower 4.25” Gearcase

4 stroke: (‘09+) 70A, 80A, 90A, 70, 80 / (‘01+) 90, 100, 115 (Not 115A)

Tohatsu® Nissan® 60-115 Horsepower (2 & 4-Stroke) 4.25” Gearcase

60C, 70C, 70 (‘02-’09) / (Not BFT): 90 to 140hp / 115hp TLDI (‘14+)

Tohatsu® Nissan® 60-90 Horsepower (2 & 4-Stroke) 4.25” Gearcase

BFT ('14+): W60, 60, 75, 90hp

Yamaha 50-100 Horsepower 4.25” Gearcase

Note: If prop strikes trim tab, replace with Yamaha part #6E5-45371-10.

High Thrust: FT50, FT60 / 2 stroke: 60 to 100hp / 4 stroke: 70, 75 (‘03-’16), 80, 90 (‘03-’16), 100hp

Yamaha 75-130 Horsepower 4.25” Gearcase